Nelutu Stepanescu

Nelutu Stepanescu

Nelutu Stepanescu
More ideas from Nelutu
In a small shop, tool stands on casters allow you to reconfigure the space to work comfortably. But even with locking casters, tools may not seem stable when fixed. For a firmer platform, install swivel casters and a straight-line action clamp at each corner of the tool stand. Simply wheel the tool to where it’s needed and push the clamp handles down to lift the wheels off the ground. Attaching a protective furniture foot pad to the bottom of each clamp provides a no-slip, non-marring…

Good for the kitchen island. Simply wheel the tool to where it’s needed and push the clamp handles down to lift the wheels off the ground. Attaching a protective furniture foot pad to the bottom of each clamp provides a no-slip, non-marring surface.

Machine Floor Locks Anyone with a machine on wheels— especially a tablesaw or planer— understands the necessity of locking it in place before using it. I use a pair of toggle clamps connected to rods. I position the machine where I want it and lock the toggle clamps down, as shown above. To keep the tool level, threaded rods adjust the clamp height so the wheels barely leave the …

Machine Floor Locks - Woodworking Shop - American Woodworker Or a simple long bolt lowering if not needed to move very often

my ring bender

Ring Bender - Homemade ring bender fabricated from steel. Bending pressure is provided by a bottle jack.

4035978810_350w.jpg 350×262 pixels

Homemade portable bender powered by a ram. Frame is fabricated from cold rolled square and rectangular stock. Dies were fashioned from tool steel and 4140 bar stock.