Suciu Mihai
Mai multe idei de la Suciu
Clamp-On Table Legs - Adapt.Table Legs by designers Ta Yang Hsu and Francois Elphick

Clamp-On Table Legs - Adapt.Table Legs by designers Ta Yang Hsu and Francois Elphick

Adap.Table - Elegant, Clamp-On Table Legs Attach In Seconds | Co.Design http://adap-tablelegs.com

Adap.Table - Elegant, Clamp-On Table Legs Attach In Seconds | Co.Design http://adap-tablelegs.com

DIYFriday Wooden Plaque Door Sign - customizable for holidays

DIYFriday Wooden Plaque Door Sign - customizable for holidays

Mason jar wall vase

Mason jar wall vase

Narrow Table - great for hall or under window or any area where it's not quite big enough for an actual table.

Narrow Table - great for hall or under window or any area where it's not quite big enough for an actual table.

Table

Table

concrete light

concrete light

54ca1c5a2b0e5b304e2688086994d7e2.jpg 553 × 1 420 pixels

54ca1c5a2b0e5b304e2688086994d7e2.jpg 553 × 1 420 pixels

Make your workbench height the distance from the floor to your first thumb knuckle. If more then yourself will be using this bench you may need to add an inch or two.......d.

Make your workbench height the distance from the floor to your first thumb knuckle. If more then yourself will be using this bench you may need to add an inch or two.......d.

Joint Connector, Small, 2-1/2" to 3-1/4" by WoodRiver. $2.25. These concealed fittings allow work surfaces to be connected rapidly and securely. They are great for joining countertop sections together. The semi-circular fastening elements are pressed against the recess walls as tension is applied. Fits in a 35mm (1-3/8") flat bottomed hole drilled 3/4" deep. Use a router with a 1/2" straight bit to connect holes. Hole spacing on the small connector is 2-1/2" to 3-1/4".

Joint Connector, Small, 2-1/2" to 3-1/4" by WoodRiver. $2.25. These concealed fittings allow work surfaces to be connected rapidly and securely. They are great for joining countertop sections together. The semi-circular fastening elements are pressed against the recess walls as tension is applied. Fits in a 35mm (1-3/8") flat bottomed hole drilled 3/4" deep. Use a router with a 1/2" straight bit to connect holes. Hole spacing on the small connector is 2-1/2" to 3-1/4".