Lucian Suciu
More ideas from Lucian
The Family Handyman - Screws DIY Tip of the Day. Use this quick and simple way to get a screw started in a hard-to-reach place. Just poke the screw through a piece of masking tape with the sticky side of the tape toward the head. Place the screwdriver in the slot, then fold the tape up onto the screwdriver. Once the screw is well started, pull the screwdriver loose and remove the tape.

poke the screw through a piece of masking tape with the sticky side of the tape toward the head. Place the screwdriver in the slot, then fold the tape up onto the screwdriver. Once the screw is well started, pull the screwdriver loose and remove the tape.

Life Hacks Of The Month - 24 Pics

DIY Screw Lube: hang a bar of soap above your workbench; run long screws across the soap before driving them and they’ll penetrate the wood smoothly, without stripping the screw head.

Make your workbench height the distance from the floor to your first thumb knuckle. If more then yourself will be using this bench you may need to add an inch or two.......d.

Rule of thumb guides best workbench height Make your workbench height the distance from the floor to your first thumb knuckle. If more then yourself will be using this bench you may need to add an inch or two.d.

Use dowel and pot magnet to pick up screws When you spill screws, nails, brads or other small metal parts on a dusty shop floor, pick them up in seconds, minus the dust

Pick up loose screws & nails in seconds, minus the dust. Screw a pot magnet (at most home centers) on the end of a wood dowel to create your “picker-upper.”Place an inside-out sandwich bag over the magnet and start sweeping the area.

http://poradu.pp.ua/uploads/posts/2015-07/strubcina-kutova-svoyimi-rukami_255.jpeg

http://poradu.pp.ua/uploads/posts/2015-07/strubcina-kutova-svoyimi-rukami_255.jpeg