Luca Marconi

Luca Marconi

Luca Marconi
Mai multe idei de la Luca
This bench-top box/pan brake can bend sheet metal into various shapes. It mounts to a workbench. It can accept up to four foot wide stock and bend 135 degrees. With the various width teeth, they can be adjusted to fit the width of the bend needed within minutes with one wrench. The clamping thickness can be adjusted from 0 to about 0.25 inches, but I would be extremely lucky to bend something that thick. The throat can open to over four inches. This brake was built from scrap I received…

This bench-top box/pan brake can bend sheet metal into various shapes. It mounts to a workbench. It can accept up to four foot wide stock and bend 135 degrees. With the various width teeth, they can be adjusted to fit the width of the bend needed within minutes with one wrench. The clamping thickness can be adjusted from 0 to about 0.25 inches, but I would be extremely lucky to bend something that thick. The throat can open to over four inches. This brake was built from scrap I received…

Как сделать самодельный трубогиб чертежи

Как сделать самодельный трубогиб чертежи

Pallet Table Cabinets

Pallet Table Cabinets

joist details

joist details

Related image

Related image

My front door i built

My front door i built

pallet-cabinet-or-sideboard.jpg (600×800)

pallet-cabinet-or-sideboard.jpg (600×800)

pallets-made-kitchen-cabinets

pallets-made-kitchen-cabinets

Constructive Approach

Constructive Approach

ленточные пилы по дереву своими руками видео: 17 тыс изображений найдено в Яндекс.Картинках

ленточные пилы по дереву своими руками видео: 17 тыс изображений найдено в Яндекс.Картинках