Angry Birds Yellow Bird Walkthrough

Here you'll find the walkthrough of how I created the Yellow Bird from Angry Birds
·
7 Pins
 9y
Collection by
Step 8: create a long flat dark-orange strip for his eyebrows. Slice them 1cm wide and about 1mm thick.   Step 9: For the feathers on his tail and head, make groups of 3. 1 long, 1 medium 1 one small tapered tube. Squish them gently together at the bottom and onto the bird. Eyebrows, Tapered, Feather, Slice, Thick, Yellow Bird, Step, Angry Birds Yellow Bird, Bottom
Step 8: create a long flat dark-orange strip for his eyebrows. Slice them 1cm wide and about 1mm thick. Step 9: For the feathers on his tail and head, make groups of 3. 1 long, 1 medium 1 one small tapered tube. Squish them gently together at the bottom and onto the bird.
Step 6: create the white for his eyes by rolling 2 small white spheres of the same size. Press them into either side of his beak. When figuring out if you have the size I practice on my finger 1st.  Step 7: press in 2 glass beads for his eyes being careful not to make marks on the white parts. Beads, Eyes, Glass Beads, Spheres, Finger, Marks, Beak, Parts, Create
Step 6: create the white for his eyes by rolling 2 small white spheres of the same size. Press them into either side of his beak. When figuring out if you have the size I practice on my finger 1st. Step 7: press in 2 glass beads for his eyes being careful not to make marks on the white parts.
Step 5: VERY GENTLY squish the beak onto the bird, hard enough to make it stick but not so hard as to squish the beak. The beak should be 3/4 of the way off the white and onto the yellow. If you mess up its ok! you meant it to be that way!! You can always re-slice here if necessary. Bird, Squish, Canning, Birds, Angry Birds
Step 5: VERY GENTLY squish the beak onto the bird, hard enough to make it stick but not so hard as to squish the beak. The beak should be 3/4 of the way off the white and onto the yellow. If you mess up its ok! you meant it to be that way!! You can always re-slice here if necessary.
Step 4: Slice the cone down the middle. It's easiest to cut it while its on the board, you can always redo/reshape/recut after if necessary. Cone, Cut, Board, Redo
Step 4: Slice the cone down the middle. It's easiest to cut it while its on the board, you can always redo/reshape/recut after if necessary.
Step 3: Make a small orange cone for his beak. Orange, A Small Orange
Step 3: Make a small orange cone for his beak.
Step 2: Make a white, flat teardrop out of the white sphere as seen in the previous photo and press it onto the bottom and slightly up on one side. Yellow, Teardrop, Sphere, Flat
Step 2: Make a white, flat teardrop out of the white sphere as seen in the previous photo and press it onto the bottom and slightly up on one side.
THE YELLOW ANGRY BIRD Step 1: create your yellow base. Form the yellow sphere into a cone shape with soft edges. Make a white sphere to press into the bottom. Shapes, Shape, Angry Bird
THE YELLOW ANGRY BIRD Step 1: create your yellow base. Form the yellow sphere into a cone shape with soft edges. Make a white sphere to press into the bottom.