Mai multe idei de la flo
Одноклассники

Одноклассники

Picture of Make Your Own DIY CNC

Picture of Make Your Own DIY CNC

Press

Press

Correct measurement. ..

Correct measurement. ..

Take a look inside 16 different Kreg Joints™ and note the recommended settings.

Take a look inside 16 different Kreg Joints™ and note the recommended settings.

Kreg® Each jig position has its recommended drilling depth. To drill in 3/4" material, set the Depth Collar 3-1/2" from the Step of the drill bit using a rule. This will place the tip of the bit approximately 1/8" from the edge of the work piece. Adjust the collar to 3-5/16" from the step of the bit for 1/2" material and 4-1/4" from the step of the bit for 1-1/2" material. Tighten the setscrew with the Allen wrench.

Kreg® Each jig position has its recommended drilling depth. To drill in 3/4" material, set the Depth Collar 3-1/2" from the Step of the drill bit using a rule. This will place the tip of the bit approximately 1/8" from the edge of the work piece. Adjust the collar to 3-5/16" from the step of the bit for 1/2" material and 4-1/4" from the step of the bit for 1-1/2" material. Tighten the setscrew with the Allen wrench.

api.ning.com files sfMgn7-7W9e0qPlO95EnuDZeipPddhr4r67t3Dj4qs-ah97sodk0zK0NO0A1VLXWyZ20m17fgr8ko9ZNSEyO4LL6Mm73nHfj 001.JPG

api.ning.com files sfMgn7-7W9e0qPlO95EnuDZeipPddhr4r67t3Dj4qs-ah97sodk0zK0NO0A1VLXWyZ20m17fgr8ko9ZNSEyO4LL6Mm73nHfj 001.JPG

Bandsaw plans

Bandsaw plans

Yes, you can load and run Windows 10 from a USB drive, a handy option when you're using a computer saddled with an older version of Windows.

Yes, you can load and run Windows 10 from a USB drive, a handy option when you're using a computer saddled with an older version of Windows.

GBMU16 Regular Duty Gate Hinges - Click to enlarge!

GBMU16 Regular Duty Gate Hinges - Click to enlarge!