Contactless Smart Thermometer using Arduino, MLX90615 IR Temperature Sensor, and Android – Save and Share Results with Pictures
Design a Low cost, Easy to build Contactless IR Thermometer that can measure body temperature, log them into an excel along with the picture of the individuals so that the record can be easily shared with concerned authorities.
Bluetooth Low Energy 5 Module from Renesas for Ultra-Low-Power IoT Applications
The Renesas Electronics Corporation has announced that they are ready to ship the sample of the new RYZ012 Bluetooth module that has been designed especially for the ultra-low-power IoT applications. As the Renesas’ first Bluetooth low energy 5 modules, RYZ012 integrates a 2.4 GHz RF transceiver supporting the IEEE802.15.4 multi-standard wireless protocol, Bluetooth Low Energy
Single Pair Ethernet Physical Layer Transceiver with TC10 Sleep Standard for Compact Automotive Applications
Microchip Technology introduced the LAN8770, an OPEN Alliance TC10 sleep standard Ethernet Physical layer transceiver (PHY) that has four-time lower sleep current (15 µA) than other available devices. The IEEE 802.3bw-2015 specification compliant LAN8770 is a compact, cost-effective, single-port 100BASE-T1 Ethernet PHY packed in a 5x5 mm or 6x6mm wettable-flanks QFN.
Latest STM32 Discovery Kit and Expansion Software Simplifies IoT-Node Connectivity and Security
STMicroelectronics is simplifying the complex software challenges that face developers of IoT nodes by introducing the B-L4S5I-IOT01A STM32 Discovery kit. The kit comes with a qualified port of FreeRTOS, fully integrated into the STM32Cube ecosystem, and ready to connect to Amazon Web Services (AWS).
10KG Load Cell with HX711 A/D Weight Sensor Module
This 5KG load cell made up of aluminium alloy can measure upto 5 kg load and outputs in the form of electrical signals proportionally. This sensor will use a HX711 Analog to Digital signal converter, it is easy to use with driving voltage 5-10V and produce the output voltage as per the force changes over it.
3D Magnetic Sensor for Compact Power Saving Industrial and Consumer Application
The Infineon Technologies AG is going to expand its XENSIV 3D magnetic sensor family TLv493D with the introduction of the TLI493D-W2BW. The new sensor uses the latest 3D Hall generation from Infineon and is housed in an extremely small (1.13 mm x 0.93 mm x 0.59 mm) wafer-level (WLB-5) package.
Wireless Multi-Sensor IoT Module with Precision Algorithms for Smart Home and Wellness Monitoring Applications
TDK Corporation has introduced the InvenSense SmartBug, a compact, out-of-the-box, wireless multi-sensor solution designed especially for the commercial and consumer IoT applications. The SmartBug provides quick and easy access to reliable and smart sensor data without the need for programming, soldering, or extra modifications.
Automotive Compliant 3.5A Synchronous Buck Converters for Point of Load (POL) Applications
Diodes Incorporated has introduced AP64350Q, AP64351Q, and AP64352Q, a series of automotive-compliant, 3.5A, Synchronous buck converters that combine a low quiescent current with a wide input voltage range of 3.8V to 40V point of load (POL) applications.
Single-Chip Power Management ICs for Continuous Operation in Industrial Applications
Ricoh has introduced two new PMICs namely RN5T5610 and RN5T5612, this single-chip solution provides four high-efficiency step-down DC/DC converters, seven low-dropout regulators, four GPIOs, an interrupt controller (INTC), and an I2C-Bus interface. These devices are designed for continuous operation in industrial applications in a wide operating temperature condition
New High-Speed Fuses from LittleFuse for Battery Energy Storage Applications
The new PSX series of high-speed fuses introduced from Littel fuse, Inc. offers up to 1500DC voltage rating and 100kA DC breaking capacity at 1500V DC for providing great protection in the smallest NH XL package to facilitate designing of more compact high energy density. The new device offers high-speed protection at these increases voltage ratings coupled with better
Flexible And Cost-Effective Automotive Pressure Sensor for Electric and Hybrid Vehicle HVAC Applications
The Renesas Electronics Corporation has introduced the ZSSC4132- an automotive pressure sensor solution with an integrated certified LINv2.2a interface.
Thin Dual-Photo Detector with Optical Sensor and Integrated Algorithms for Wearable Health and Fitness Products
Maxim Integrated Products Inc. has introduced the MAXM86146 dual-photo detector optical sensor solution for fast and easy designing of sensors to make them fit with the thinnest optical sensors in wearable health and fitness products. The new device allows the designers of advanced wearable products to achieve a 45% thinner optical design instead of a discrete approach.
New Zero Drift Hall-Effect Current Sensors for High Accuracy Current Measurement
Texas Instruments (TI) introduced theTMCS1100 and TMCS1101, zero-drift Hall-effect current sensors that enable the lowest drift and highest accuracy over time and temperature while providing reliable 3-kVrms isolation. TI has applied the expertise of both isolation and high-precision analog to the TMCS1100 and TMCS1101, this enables the engineers to design systems that will
New Low Power Embedded Controllers with 256 kB Flash Memory for Compact Portable Designs
The Renesas Electronics Corporation has introduced a new 256kilobyte(KB) flash memory variant to the RE01 Family embedded controllers that include the 1.5 megabytes (MB) flash memory embedded controller. The new ultra-low power consumption controller is designed based on the breakthrough silicon-on-thin-buried-oxide (SOTB) process technology and it is built around the Arm
High Speed Ground Sense CMOS Op-Amp with Gigh Noise Immunity for Industrial and Consumer Equipments
ROHM has introduced the BD77501G, a high-speed ground sense CMOS op-amp designed especially for industrial and consumer equipment that require high speed sensing such as anomaly detection systems used in measurement and control equipment along with sensors that work with very small signals.
Arduino based Women Safety Device with GPS Tracking and Emergency Alerts
Here we build an Arduino and GPS based wrist band that can be worn by women, using which they can inform police or anyone, using SOS emergency SMS along with the current location. Using this information, the police will be able to save the victim from the location