Christian Opris
Mai multe idei de la Christian
Kräuter Kräuter Kräuter

Kräuter Kräuter Kräuter

Blumenständer

Blumenständer

Runder Drehtisch

Runder Drehtisch

Double -duty Vise. FamilyHandyman magazine April 2016. Pg 37                                                                                                                                                                                 Mais

Double -duty Vise. FamilyHandyman magazine April 2016. Pg 37 Mais

Hier zwei Friction Folder mit Horngriffen

Hier zwei Friction Folder mit Horngriffen

Many deer antlers are too curved to be used as-is for knife handles, but you can straighten them so that they can accept the tang of a blade. Once you've straightened an antler, you can prepare and attach it to a knife blade without needing adhesives.

Many deer antlers are too curved to be used as-is for knife handles, but you can straighten them so that they can accept the tang of a blade. Once you've straightened an antler, you can prepare and attach it to a knife blade without needing adhesives.

.  Check website with best way to #learn #woodworking here: http://ewoodworking.ninja . Kaizen Foam - FastCap - Woodworking Tools

. Check website with best way to #learn #woodworking here: http://ewoodworking.ninja . Kaizen Foam - FastCap - Woodworking Tools

custom tool bed. this'll come in handy, someday.

custom tool bed. this'll come in handy, someday.

Jig Saw Table | Woodsmith Tips

Jig Saw Table | Woodsmith Tips

Sharpening Guide    I use sandpaper to sharpen my chisels. By "sanding" the bevel of the blade flat and smooth, it produces a sharp edge in just a few minutes.    The problem is holding the chisel at a consistent angle as you sharpen. To do this, I clamp the chisel to a simple sharpening guide (see photo).       As you can see in the drawing at the right, the guide starts off as a pair of wedge-shaped support blocks that hold the top at a 25° angle. To square up the chisel (and keep it from…

Sharpening Guide I use sandpaper to sharpen my chisels. By "sanding" the bevel of the blade flat and smooth, it produces a sharp edge in just a few minutes. The problem is holding the chisel at a consistent angle as you sharpen. To do this, I clamp the chisel to a simple sharpening guide (see photo). As you can see in the drawing at the right, the guide starts off as a pair of wedge-shaped support blocks that hold the top at a 25° angle. To square up the chisel (and keep it from…