DGA Workshop

DGA Workshop

Constanța / Romania
DGA Workshop
Mai multe idei de la DGA
Examples of good and bad stick welds

Examples of good and bad stick welds

12109330_10205307476986317_3886102267700338186_n.jpg (Imagen JPEG, 960 × 720 pixels) - Escala (84%)

12109330_10205307476986317_3886102267700338186_n.jpg (Imagen JPEG, 960 × 720 pixels) - Escala (84%)

Tape Storage - Much better idea than the paper-towel style holders I'm using now. On mine, the roll I need is always in the middle - not handy!

Tape Storage - Much better idea than the paper-towel style holders I'm using now. On mine, the roll I need is always in the middle - not handy!

Pvc fishing rod holders. Just used pvc pipe with end caps. And cut slits for the reels.

Pvc fishing rod holders. Just used pvc pipe with end caps. And cut slits for the reels.

Handmade Fishing Rod Holder/Rack for 9 Rods

Handmade Fishing Rod Holder/Rack for 9 Rods

A personal favorite from my Etsy shop https://www.etsy.com/listing/254116321/fishing-rod-wall-mount-holder-5-clip

A personal favorite from my Etsy shop https://www.etsy.com/listing/254116321/fishing-rod-wall-mount-holder-5-clip

Fishing Rod Holder

Fishing Rod Holder

19-W3006 - Bear Fishing Rod Holder Woodworking Plan.

19-W3006 - Bear Fishing Rod Holder Woodworking Plan.

This is how I cutt bottles. I built this jig to make a clean and straight scar perpendicular to the bottle's vertical axis. The threaded rod and nuts allow the glass cutter to be adjusted to cut different bottle lengths. After marking the scar, I pour boiling water on it and then I plunge the bottle into icy water. Sudden temperature change makes the bottle to split in two leaving a perfect cut. Then I smooth the glass edges with fine grit sand paper.

This is how I cutt bottles. I built this jig to make a clean and straight scar perpendicular to the bottle's vertical axis. The threaded rod and nuts allow the glass cutter to be adjusted to cut different bottle lengths. After marking the scar, I pour boiling water on it and then I plunge the bottle into icy water. Sudden temperature change makes the bottle to split in two leaving a perfect cut. Then I smooth the glass edges with fine grit sand paper.

Silhouette Design Store - View Design #8842: helicopter

Silhouette Design Store - View Design #8842: helicopter