Adrian Stefan
Mai multe idei de la Adrian
posavasos                                                                                                                                                                                 Más

posavasos Más

Interessant

Interessant

For those occasions when you need a stable way to hold a board on its edge, turn to a tool that’s as old as woodworking itself—the wedge. I fashioned the wedge stands shown at right from scraps of 2x6 and a 3/8x6" bolt and nut. To make the stand, cut a 7"-long chunk from the 2x6 and drill a 1/2" hole centere d 2 1/4" from the edge and 1 3/4" up from the bottom. This hole reduces the likelihood of the stand splitting once the wedge is cut out. Mark the cutlines for the wedge as shown in..

For those occasions when you need a stable way to hold a board on its edge, turn to a tool that’s as old as woodworking itself—the wedge. I fashioned the wedge stands shown at right from scraps of 2x6 and a 3/8x6" bolt and nut. To make the stand, cut a 7"-long chunk from the 2x6 and drill a 1/2" hole centere d 2 1/4" from the edge and 1 3/4" up from the bottom. This hole reduces the likelihood of the stand splitting once the wedge is cut out. Mark the cutlines for the wedge as shown in..

Fastener pattern in 2x4 frame of workbench.

Fastener pattern in 2x4 frame of workbench.

20 Brillantes astuces de rangement, pour un garage parfaitement rangé! - Trucs et Astuces - Trucs et Bricolages

20 Brillantes astuces de rangement, pour un garage parfaitement rangé! - Trucs et Astuces - Trucs et Bricolages

Recycler des bouteilles plastique pour tout ranger

Recycler des bouteilles plastique pour tout ranger

Zip tie storage in pvc pipes

Zip tie storage in pvc pipes

Wall tool holders

Wall tool holders

To hold a lot of pliers, it's easiest to just hook them onto the edge of a piece of wood. A lot of pliers go in a small amount of space that way. The piece of wood in this holder is tapered towards the top edge, so that it doesn't force the handles too far apart. It's really only about half full with pliers so far.

To hold a lot of pliers, it's easiest to just hook them onto the edge of a piece of wood. A lot of pliers go in a small amount of space that way. The piece of wood in this holder is tapered towards the top edge, so that it doesn't force the handles too far apart. It's really only about half full with pliers so far.

I want to build something like this over the left side of my workbench...hold everything pallet tool rack...

I want to build something like this over the left side of my workbench...hold everything pallet tool rack...